HP 8753 VNA Control

This application communicates with an HP 8753 (a b c or d) Vector Network Analyzer.

This application communicates with an HP 8753 (a b c or d) Vector Network Analyzer using HPIB. It is setup to make two port measurements, therefore all 4 S-Parameters are measured and returned to the host PC. The measurements along with user Notes and the VNA's setup parameters can be saved to a standard "s2p" file.

For best results, the VNA should have had a full 2-port calibration performed, but for a quick look at the measurement data, calibration is not mandatory.