Regarding the real time reading/displaying of the adc values of tms320f28027 on the simulink scope and how should i use the RTDX

Respected Sir,

   I'm unable to display the adc values on the simulink scpoe with RTDX as i'm new to the simulink and ccs environment. after surfing for help I tried to find a command called

>> rtdxtutorial

but when i tried to excute in the matlab window

below are the errors I observed

>> rtdxtutorial ================================================================== The RTDXTUTORIAL is an example script intended to get the user started with the RTDX.

 A simple target DSP application is loaded and run on the target 
 DSP, and data messages are transferred via RTDX between the host
 application (MATLAB) and the target DSP. The tutorial writes 
 integers 1:10 to the target DSP. The target DSP takes the array
 of integers, increments it by 1, and writes the resultant array 
 to the host. This action is performed 20 successive times, with
 each iteration incrementing the previous array result by one. 
 The 20 messages are read using various output formats. 
==================================================================

Error using Link.ccssetup/Connect Cannot start CCS application (COM error ID: 0x80040154). Verify that your CCS software is installed and configured properly.

Error in ccsboardinfo (line 68) ccssetup.Connect(); % Connect to CCS Setup

Error in getNumTargetsInCcsSetup (line 7) setupinfo = ccsboardinfo;

Error in selectBoardProcNumbers (line 13) numTargets = getNumTargetsInCcsSetup;

Error in rtdxtutorial (line 42) [boardNum,procNum] = selectBoardProcNumbers;

so how can i correct the very starting error (COM error ID: 0x80040154) as it say LINKCCSSETUP error, is their any linking file missing and the ccs version i'm using is

CCSv6.1.1.00022

Regards,

Anuroop