MPU6050 IMU Sensor

Measure acceleration, angular rate, and temperature along axes of MPU-6050 sensor

• Library:

• Simulink Support Package for Arduino Hardware / Sensors

• 

Description

The MPU6050 IMU Sensor block reads data from the MPU-6050 sensor that is connected to the hardware.

The block outputs acceleration, angular rate, and temperature along the axes of the sensor. The block outputs acceleration and angular rate as a 3-by-1 double-precision array. The temperature data is output as a scalar double.

Note

The output from the MPU-6050 sensor may have a finite non-negligible offset value except for the Temperature output. You may consider correcting this offset value for such cases.

This diagram shows the default orientation of the x-, y-, and z-axes of the MPU-6050 sensor.

If you simulate a model that contains the MPU6050 IMU Sensor block without connecting it to the hardware, the block outputs zeros. For more information, see Block Produces Zeros or Does Nothing in Simulation.

Ports

Output

Accel — Acceleration including force of gravity along axes of sensor

vector

The Accel port outputs acceleration along the x-, y-, and z-axes of the sensor as a 3-by-1 vector. The acceleration is measured in m/s² and also includes acceleration due to gravity.

Dependencies

The Accel port is available only when you select the Acceleration (m/s^2) parameter.

Data Types: double

Ang rate — Angle of rotation per second along axes of sensor

vector

The Ang rate port outputs the angle of rotation per second along the x-, y-, and z-axes of the sensor as a 3-by-1 vector. The angular rate is measured in dps.

Dependencies

The Ang rate port is available only when you select the Angular rate (dps) parameter.

Data Types: double

Temperature — Temperature along axes of sensor

vector

The Temperature port outputs the temperature along the x-, y-, and z-axes of the sensor. The temperature is measured in degree Celsius.

Dependencies

The Temperature port is available only when you select the Temperature (deg C) parameter.

Data Types: double

Status — Status of read operation

scalar

The Status port outputs the status of the read operation. The port outputs the status as a uint8 value. Each value corresponds to the data transfer status.

Status Value	Status Description
0	SUCCESS
1	BUSY
2	ARBITRATION_LOST
4	NO_ACKNOWLEDGE
8	BUS_ERROR
16	BUS_NOT_IN_USE
32	SENSOR_INIT_ERROR

Dependencies

The Status port is available only when you select the Status parameter.

Data Types: uint8

Parameters

I2C address — I2C slave address of sensor

0x68 (default) | 0x69

Select the I2C address of the sensor from which the block reads the values.

Sample time — Interval to read values from sensor

0.1 (default) | -1 | any nonnegative value

Specify how often the block read values from the sensor, in seconds. When you specify this parameter as -1, Simulink^® determines the best sample time for the block based on the block context within the model.

Select outputs

Acceleration (m/s^2) — Acceleration including force of gravity along axes of sensor

on (default) | off

When you select the Acceleration (m/s^2) parameter, the Accel port becomes available. For more information on the Accel port, see Accel.

Angular rate (dps) — Angle of rotation per second along axes of sensor

on (default) | off

When you select the Angular rate (dps) parameter, the Ang rate port becomes available. For more information on the Ang rate port, see Ang rate.

Temperature (deg C) — Temperature along axes of sensor

off (default) | on

When you select the Temperature (deg C) parameter, the Temperature port becomes available. For more information on the Temperature (deg C) port, see Temperature.

Status — Status of read operation

off (default) | on

Select this parameter to display the status of read operation.

When you select the Status parameter, the Status port becomes available. For more information on the Status port, see Status.

Advanced sensor settings (optional)

Accelerometer range — Range of acceleration deviation measured by accelerometer

2G (default) | 4G | 8G | 16G

Select a deviation in the acceleration that the accelerometer can measure. The smaller the accelerometer range, the more sensitive the readings from the accelerometer. A small range provides more detailed data, resulting in a more precise reading from the accelerometer.

Dependencies

The Accelerometer range parameter is available only when you select the Acceleration (m/s^2) parameter.

Gyroscope range — Maximum angular velocity measured by gyroscope

250 dps (default) | 500 dps | 1000 dps | 2000 dps

Specify the maximum angular velocity that the gyroscope can measure per second.

Dependencies

The Gyroscope range parameter is available only when you select the Angular rate (dps) parameter.

Accelerometer and Gyroscope bandwidth — Frequency response of accelerometer and gyroscope

1 (default) | 0 | 2 | 3 | 4 | 5 | 6

Specify the highest frequency at which the accelerometer and gyroscope samples the signal without aliasing.

Dependencies

The Accelerometer and Gyroscope bandwidth parameter is available only when you select the Acceleration (m/s^2) or Angular rate (dps) parameter.