Describe the bit-length of ptrdiff_t data for the hardware that
you use to test code.
If ProdEqTarget is off, an Embedded Coder®
processor-in-the-loop (PIL) simulation checks this setting with reference to the
target hardware. If ProdEqTarget is on, the
PIL simulation checks the ProdBitPerPtrDiffT setting.
Category: Hardware Implementation
Default: Device-specific value (see Dependencies)
Value must be 8, 16, 24, 32, 40, 64, or 128 and greater or equal to the value of int.
Selecting a device by using the Device vendor and Device type parameters sets a device-specific value for this parameter.
This parameter is enabled only if you can modify it for the selected hardware.
Parameter:
TargetBitPerPtrDiffT |
| Type: integer |
| Value: any valid value |
| Default: device dependent |
| Application | Setting |
|---|---|
| Debugging | No impact |
| Traceability | No impact |
| Efficiency | No impact |
| Safety precaution | No impact when Test hardware is the same as production hardware is selected. If it is not selected, no recommendation. |