Function
|
Description
|
Product
Function List |
| aa2int | Convert amino acid sequence from letter to integer representation |
Bioinformatics Toolbox™
|
| aa2nt | Convert amino acid sequence to nucleotide sequence |
Bioinformatics Toolbox™
|
| aacount | Count amino acids in sequence |
Bioinformatics Toolbox™
|
| abcd2h | Convert ABCD-parameters to hybrid h-parameters |
RF Toolbox™
|
| abcd2s | Convert ABCD-parameters to S-parameters |
RF Toolbox™
|
| abcd2y | Convert ABCD-parameters to Y-parameters |
RF Toolbox™
|
| abcd2z | Convert ABCD-parameters to Z-parameters |
RF Toolbox™
|
| abs | Entrywise magnitude of frequency response |
Control System Toolbox™
|
| abs | Absolute value of fi object |
Fixed-Point Toolbox™
|
| abs | Absolute value and complex magnitude |
MATLAB®
|
| abs | Absolute value (magnitude) |
Signal Processing Toolbox™
|
| abs2active | Convert constraints from absolute to active format |
Financial Toolbox™
|
| ac2poly | Convert autocorrelation sequence to prediction polynomial |
Signal Processing Toolbox™
|
| ac2rc | Convert autocorrelation sequence to reflection coefficients |
Signal Processing Toolbox™
|
| accrfrac | Fraction of coupon period before settlement |
Financial Toolbox™
|
| accumarray | Construct array with accumulation |
MATLAB®
|
| acker | Pole placement design for single-input systems |
Control System Toolbox™
|
| acos | Inverse cosine; result in radians |
MATLAB®
|
| acosd | Inverse cosine; result in degrees |
MATLAB®
|
| acosh | Inverse hyperbolic cosine |
MATLAB®
|
| acot | Inverse cotangent; result in radians |
MATLAB®
|
| acotd | Inverse cotangent; result in degrees |
MATLAB®
|
| acoth | Inverse hyperbolic cotangent |
MATLAB®
|
| acrubond | Accrued interest of security with periodic interest payments |
Financial Toolbox™
|
| acrudisc | Accrued interest of discount security paying at maturity |
Financial Toolbox™
|
| acsc | Inverse cosecant; result in radians |
MATLAB®
|
| acscd | Inverse cosecant; result in degrees |
MATLAB®
|
| acsch | Inverse hyperbolic cosecant |
MATLAB®
|
| activate | Make specified project, file, or build configuration active in CCS IDE |
Embedded IDE Link™ CC (for TI’s Code Composer Studio™)
|
| activate | Make specified project active |
Embedded IDE Link™ MU (for Green Hills® MULTI®)
|
| activate | Make specified project, file, or configuration active |
Embedded IDE Link™ VS (for Analog Devices™ VisualDSP++®)
|
| active2abs | Convert constraints from active to absolute format |
Financial Toolbox™
|
| actual2normalized | Compute normalized-distance between uncertain atom nominal value and specified value |
Robust Control Toolbox™
|
| actxcontrol | Create Microsoft® ActiveX® control in figure window |
MATLAB®
|
| actxcontrollist | List all currently installed Microsoft® ActiveX® controls |
MATLAB®
|
| actxcontrolselect | Open GUI to create Microsoft® ActiveX® control |
MATLAB®
|
| actxGetRunningServer | Get handle to running instance of Automation server |
MATLAB®
|
| actxserver | Create COM server |
MATLAB®
|
| adapt | Allow neural network to change weights and biases on inputs |
Neural Network Toolbox™
|
| adaptfilt | Adaptive filter |
Filter Design Toolbox™
|
| adaptfilt.adjlms | FIR adaptive filter that uses adjoint LMS algorithm |
Filter Design Toolbox™
|
| adaptfilt.ap | FIR adaptive filter that uses direct matrix inversion |
Filter Design Toolbox™
|
| adaptfilt.apru | FIR adaptive filter that uses recursive matrix updating |
Filter Design Toolbox™
|
| adaptfilt.bap | FIR adaptive filter that uses block affine projection |
Filter Design Toolbox™
|
| adaptfilt.blms | FIR adaptive filter that uses BLMS |
Filter Design Toolbox™
|
| adaptfilt.blmsfft | FIR adaptive filter that uses FFT-based BLMS |
Filter Design Toolbox™
|
| adaptfilt.dlms | FIR adaptive filter that uses delayed LMS |
Filter Design Toolbox™
|
| adaptfilt.fdaf | FIR adaptive filter that uses frequency-domain with bin step size normalization |
Filter Design Toolbox™
|
| adaptfilt.filtxlms | FIR adaptive filter that uses filtered-x LMS |
Filter Design Toolbox™
|
| adaptfilt.ftf | Fast transversal LMS adaptive filter |
Filter Design Toolbox™
|
| adaptfilt.gal | FIR adaptive filter that uses gradient lattice |
Filter Design Toolbox™
|
| adaptfilt.hrls | FIR adaptive filter that uses householder (RLS) |
Filter Design Toolbox™
|
| adaptfilt.hswrls | FIR adaptive filter that uses householder sliding window RLS |
Filter Design Toolbox™
|
| adaptfilt.lms | FIR adaptive filter that uses LMS |
Filter Design Toolbox™
|
| adaptfilt.lsl | Adaptive filter that uses LSL |
Filter Design Toolbox™
|
| adaptfilt.nlms | FIR adaptive filter that uses NLMS |
Filter Design Toolbox™
|
| adaptfilt.pbfdaf | FIR adaptive filter that uses PBFDAF with bin step size normalization |
Filter Design Toolbox™
|
| adaptfilt.pbufdaf | FIR adaptive filter that uses PBUFDAF with bin step size normalization |
Filter Design Toolbox™
|
| adaptfilt.qrdlsl | Adaptive filter that uses QR-decomposition-based LSL |
Filter Design Toolbox™
|
| adaptfilt.qrdrls | FIR adaptive filter that uses QR-decomposition-based RLS |
Filter Design Toolbox™
|
| adaptfilt.rls | FIR adaptive filter that uses direct form RLS |
Filter Design Toolbox™
|
| adaptfilt.sd | FIR adaptive filter that uses sign-data algorithm |
Filter Design Toolbox™
|
| adaptfilt.se | FIR adaptive filter that uses sign-error algorithm |
Filter Design Toolbox™
|
| adaptfilt.ss | FIR adaptive filter that uses sign-sign algorithm |
Filter Design Toolbox™
|
| adaptfilt.swftf | FIR adaptive filter that uses sliding window fast transversal LMS |
Filter Design Toolbox™
|
| adaptfilt.swrls | FIR adaptive filter that uses window recursive least squares (RLS) |
Filter Design Toolbox™
|
| adaptfilt.tdafdct | Adaptive filter that uses discrete cosine transform |
Filter Design Toolbox™
|
| adaptfilt.tdafdft | Adaptive filter that uses discrete Fourier transform |
Filter Design Toolbox™
|
| adaptfilt.ufdaf | FIR adaptive filter that uses unconstrained frequency-domain with quantized step size normalization |
Filter Design Toolbox™
|
| adapthisteq | Contrast-limited adaptive histogram equalization (CLAHE) |
Image Processing Toolbox™
|
| adaptmesh | Adaptive mesh generation and PDE solution |
Partial Differential Equation Toolbox™
|
| add | Add files or new typedef to active project in CCS |
Embedded IDE Link™ CC (for TI’s Code Composer Studio™)
|
| add | Add two objects using fimath object |
Fixed-Point Toolbox™
|
| add | Add file or data type to active project |
Embedded IDE Link™ MU (for Green Hills® MULTI®)
|
| add | Add entry to IVI configuration store object |
Instrument Control Toolbox™
|
| add | Add file or data type to active project |
Embedded IDE Link™ VS (for Analog Devices™ VisualDSP++®)
|
| Add (env collection object) | Add new xPC Target™ environment collection object |
xPC Target™
|
| add_block | Add block to Simulink® system |
Simulink®
|
| add_exec_event_listener | Register listener for block method execution event |
Simulink®
|
| add_line | Add line to Simulink® system |
Simulink®
|
| add_param | Add parameter to Simulink® system |
Simulink®
|
| addAdditionalHeaderFile | Add additional header file to array of additional header files for TFL table entry |
Real-Time Workshop® Embedded Coder™
|
| addAdditionalIncludePath | Add additional include path to array of additional include paths for TFL table entry |
Real-Time Workshop® Embedded Coder™
|
| addAdditionalLinkObj | Add additional link object to array of additional link objects for TFL table entry |
Real-Time Workshop® Embedded Coder™
|
| addAdditionalLinkObjPath | Add additional link object path to array of additional link object paths for TFL table entry |
Real-Time Workshop® Embedded Coder™
|
| addAdditionalSourceFile | Add additional source file to array of additional source files for TFL table entry |
Real-Time Workshop® Embedded Coder™
|
| addAdditionalSourcePath | Add additional source path to array of additional source paths for TFL table entry |
Real-Time Workshop® Embedded Coder™
|
| addArgConf | Add argument configuration information for Simulink® model port to model-specific C function prototype |
Real-Time Workshop® Embedded Coder™
|
| addArtifact | Add artifact to test results object |
SystemTest™
|
| addBody (Aero.Animation) | Add loaded body to animation object and generate its patches |
Aerospace Toolbox
|
| addCause (MException) | Append MException objects |
MATLAB®
|
| addchannel | Add hardware channels to analog input or analog output object |
Data Acquisition Toolbox™
|
| addCompileFlags | Add compiler options to model's build information |
Real-Time Workshop®
|
| addConceptualArg | Add conceptual argument to array of conceptual arguments for TFL table entry |
Real-Time Workshop® Embedded Coder™
|
| AddConstraint | Add design contraint |
Model-Based Calibration Toolbox™
|
| addDefines | Add preprocessor macro definitions to model's build information |
Real-Time Workshop®
|
| AddDesign | Add design to test plan |
Model-Based Calibration Toolbox™
|
| addedvarplot | Added-variable plot |
Statistics Toolbox™
|
| addEntry | Add table entry to collection of table entries registered in TFL table |
Real-Time Workshop® Embedded Coder™
|
| addevent | Add event to timeseries object |
MATLAB®
|
| AddFilter | Add user-defined filter to data set |
Model-Based Calibration Toolbox™
|
| addframe | Add frame to Audio/Video Interleaved (AVI) file |
MATLAB®
|
| addgroup | Add data access group to opcda object |
OPC Toolbox™
|
| addIncludeFiles | Add include files to model's build information |
Real-Time Workshop®
|
| addIncludePaths | Add include paths to model's build information |
Real-Time Workshop®
|
| addIOConf | Add AUTOSAR I/O configuration to a model |
Real-Time Workshop® Embedded Coder™
|
| additem | Add data access items to dagroup object |
OPC Toolbox™
|
| addlevels | Add levels |
Statistics Toolbox™
|
| addlift | Add lifting steps to lifting scheme |
Wavelet Toolbox™
|
| addline | Add hardware lines to digital I/O object |
Data Acquisition Toolbox™
|
| addLinkFlags | Add link options to model's build information |
Real-Time Workshop®
|
| addLinkObjects | Add link objects to model's build information |
Real-Time Workshop®
|
| addlistener (handle) | Create event listener |
MATLAB®
|
| addmf | Add membership function to Fuzzy Inference System |
Fuzzy Logic Toolbox™
|
| addmuxchannel | Add hardware channels when using multiplexer board |
Data Acquisition Toolbox™
|
addNode (Aero.Virtual
RealityAnimation) | Add existing node to current virtual reality world |
Aerospace Toolbox
|
| addNonBuildFiles | Add nonbuild-related files to model's build information |
Real-Time Workshop®
|
| addOptional (inputParser) | Add optional argument to inputParser schema |
MATLAB®
|
| addoutputspec | Add output specification to operating point specification |
Simulink® Control Design™
|
| addParamValue (inputParser) | Add parameter-value argument to inputParser schema |
MATLAB®
|
| addpath | Add directories to search path |
MATLAB®
|
| addpref | Add preference |
MATLAB®
|
| addprop (dynamicprops) | Add dynamic property |
MATLAB®
|
| addproperty | Add custom property to COM object |
MATLAB®
|
| addreg | Add custom regressors to idnalrx model |
System Identification Toolbox™
|
| addregister | Append registers to list of saved registers in property savedregs of function objects |
Embedded IDE Link™ CC (for TI’s Code Composer Studio™)
|
| addRequired (inputParser) | Add required argument to inputParser schema |
MATLAB®
|
| address | Address and page for entry in symbol table in CCS IDE |
Embedded IDE Link™ CC (for TI’s Code Composer Studio™)
|
| address | Return address and memory type of specified symbol |
Embedded IDE Link™ MU (for Green Hills® MULTI®)
|
| address | Return address and memory type of specified symbol |
Embedded IDE Link™ VS (for Analog Devices™ VisualDSP++®)
|
| addRoute (Aero.VirtualRealityAnimation) | Add VRML ROUTE statement to virtual reality animation |
Aerospace Toolbox
|
| addrule | Add rule to Fuzzy Inference System |
Fuzzy Logic Toolbox™
|
| addsample | Add data sample to timeseries object |
MATLAB®
|
| addsampletocollection | Add sample to tscollection object |
MATLAB®
|
| addscope | Create scopes |
xPC Target™
|
| addsignal | Add signals to scope represented by scope object |
xPC Target™
|
| addSourceFiles | Add source files to model's build information |
Real-Time Workshop®
|
| addSourcePaths | Add source paths to model's build information |
Real-Time Workshop®
|
| addterms | Add terminators to unconnected ports in model |
Simulink®
|
| AddTestFilter | Add user-defined test filter to data set |
Model-Based Calibration Toolbox™
|
| addtodate | Modify date number by field |
MATLAB®
|
| addts | Add timeseries object to tscollection object |
MATLAB®
|
| addvar | Add variable to Fuzzy Inference System |
Fuzzy Logic Toolbox™
|
| AddVariable | Add user-defined variable to data set |
Model-Based Calibration Toolbox™
|
| addViewpoint (Aero.VirtualRealityAnimation) | Add viewpoint for virtual reality animation |
Aerospace Toolbox
|
| adivdsp | Create object to session in VisualDSP++® IDE |
Embedded IDE Link™ VS (for Analog Devices™ VisualDSP++®)
|
| adline | Accumulation/Distribution line |
Financial Toolbox™
|
| adosc | Accumulation/Distribution oscillator |
Financial Toolbox™
|
| advice | Analysis and recommendations for data or estimated linear polynomial and state-space models |
System Identification Toolbox™
|
| aff2pol | Convert affine parameter-dependent models to polytopic models |
Robust Control Toolbox™
|
| affyinvarsetnorm | Perform rank invariant set normalization on probe intensities from multiple Affymetrix® CEL or DAT files |
Bioinformatics Toolbox™
|
| affyprobeaffinities | Compute Affymetrix® probe affinities from their sequences and MM probe intensities |
Bioinformatics Toolbox™
|
| affyprobeseqread | Read data file containing probe sequence information for Affymetrix® GeneChip® array |
Bioinformatics Toolbox™
|
| affyread | Read microarray data from Affymetrix® GeneChip® file |
Bioinformatics Toolbox™
|
| affysnpquartets | Create table of SNP probe quartet results for Affymetrix® probe set |
Bioinformatics Toolbox™
|
| agferead | Read Agilent® Feature Extraction Software file |
Bioinformatics Toolbox™
|
| aic | Akaike Information Criterion for estimated model |
System Identification Toolbox™
|
| aicbic | Calculate Akaike (AIC) and Bayesian (BIC) information criteria for model order selection |
GARCH Toolbox™
|
| airspeed | Compute airspeed from velocity |
Aerospace Toolbox
|
| airy | Airy functions |
MATLAB®
|
| algdeintrlv | Restore ordering of symbols using algebraically derived permutation table |
Communications Toolbox™
|
| algintrlv | Reorder symbols using algebraically derived permutation table |
Communications Toolbox™
|
| Algorithm Properties | Algorithm properties affecting estimation process for linear models |
System Identification Toolbox™
|
| AliasMatrix | Alias matrix for linear model parameters |
Model-Based Calibration Toolbox™
|
| align | Align user interface controls (uicontrols) and axes |
MATLAB®
|
| alignsignals | Align two signals by delaying earliest signal |
Communications Toolbox™
|
| alim | Set or query axes alpha limits |
MATLAB®
|
| all | Determine whether all array elements are nonzero |
Fixed-Point Toolbox™
|
| all | Determine whether all array elements are nonzero |
MATLAB®
|
| allchild | Find all children of specified objects |
MATLAB®
|
| allmargin | All crossover frequencies and corresponding stability margins |
Control System Toolbox™
|
| allnodes | Tree nodes |
Wavelet Toolbox™
|
| allpassbpc2bpc | Allpass filter for complex bandpass transformation |
Filter Design Toolbox™
|
| allpasslp2bp | Allpass filter for lowpass to bandpass transformation |
Filter Design Toolbox™
|
| allpasslp2bpc | Allpass filter for lowpass to complex bandpass transformation |
Filter Design Toolbox™
|
| allpasslp2bs | Allpass filter for lowpass to bandstop transformation |
Filter Design Toolbox™
|
| allpasslp2bsc | Allpass filter for lowpass to complex bandstop transformation |
Filter Design Toolbox™
|
| allpasslp2hp | Allpass filter for lowpass to highpass transformation |
Filter Design Toolbox™
|
| allpasslp2lp | Allpass filter for lowpass to lowpass transformation |
Filter Design Toolbox™
|
| allpasslp2mb | Allpass filter for lowpass to M-band transformation |
Filter Design Toolbox™
|
| allpasslp2mbc | Allpass filter for lowpass to complex M-band transformation |
Filter Design Toolbox™
|
| allpasslp2xc | Allpass filter for lowpass to complex N-point transformation |
Filter Design Toolbox™
|
| allpasslp2xn | Allpass filter for lowpass to N-point transformation |
Filter Design Toolbox™
|
| allpassrateup | Allpass filter for integer upsample transformation |
Filter Design Toolbox™
|
| allpassshift | Allpass filter for real shift transformation |
Filter Design Toolbox™
|
| allpassshiftc | Allpass filter for complex shift transformation |
Filter Design Toolbox™
|
| almanac | Parameters for Earth, planets, Sun, and Moon |
Mapping Toolbox™
|
| alpha | Set transparency properties for objects in current axes |
MATLAB®
|
| alphabeta | Compute incidence and sideslip angles |
Aerospace Toolbox
|
| alphamap | Specify figure alphamap (transparency) |
MATLAB®
|
| AlternativeModelStatistics | Summary statistics for alternative models |
Model-Based Calibration Toolbox™
|
| AlternativeResponses | Array of alternative responses for this response |
Model-Based Calibration Toolbox™
|
| amd | Approximate minimum degree permutation |
MATLAB®
|
| amdemod | Amplitude demodulation |
Communications Toolbox™
|
| aminolookup | Find amino acid codes, integers, abbreviations, names, and codons |
Bioinformatics Toolbox™
|
| ammod | Amplitude modulation |
Communications Toolbox™
|
| amortize | Amortization schedule |
Financial Toolbox™
|
| analoginput | Create analog input object |
Data Acquisition Toolbox™
|
| analogoutput | Create analog output object |
Data Acquisition Toolbox™
|
| analyze75info | Read metadata from header file of Analyze 7.5 data set |
Image Processing Toolbox™
|
| analyze75read | Read image data from image file of Analyze 7.5 data set |
Image Processing Toolbox™
|
| ancestor | Ancestor of graphics object |
MATLAB®
|
| and | Find logical AND of array or scalar inputs |
Fixed-Point Toolbox™
|
| and | Find logical AND of array or scalar inputs |
MATLAB®
|
| andrewsplot | Andrews plot |
Statistics Toolbox™
|
| anfis | Training routine for Sugeno-type Fuzzy Inference System (MEX only) |
Fuzzy Logic Toolbox™
|
| anfisedit | Open ANFIS Editor GUI |
Fuzzy Logic Toolbox™
|
| angl2str | Format angle strings |
Mapping Toolbox™
|
| angle | Phase angle |
MATLAB®
|
| angle | Phase angle |
Signal Processing Toolbox™
|
| angle2dcm | Create direction cosine matrix from rotation angles |
Aerospace Toolbox
|
| angle2quat | Convert rotation angles to quaternion |
Aerospace Toolbox
|
| angledim | Convert angles units |
Mapping Toolbox™
|
| animate | Run application on target processor to breakpoint |
Embedded IDE Link™ CC (for TI’s Code Composer Studio™)
|
| animate | Enable or disable animation mode |
Simulink®
|
| Animation (Aero.Animation) | Construct animation object |
Aerospace Toolbox
|
| annotation | Create annotation objects |
MATLAB®
|
| annurate | Periodic interest rate of annuity |
Financial Toolbox™
|
| annuterm | Number of periods to obtain value |
Financial Toolbox™
|
| anova1 | One-way analysis of variance |
Statistics Toolbox™
|
| anova2 | Two-way analysis of variance |
Statistics Toolbox™
|
| anovan | N-way analysis of variance |
Statistics Toolbox™
|
| ans | Most recent answer |
MATLAB®
|
| ansaribradley | Ansari-Bradley test |
Statistics Toolbox™
|
| antipode | Point on opposite side of globe |
Mapping Toolbox™
|
| any | Determine whether any array elements are nonzero |
Fixed-Point Toolbox™
|
| any | Determine whether any array elements are nonzero |
MATLAB®
|
| aoctool | Interactive analysis of covariance |
Statistics Toolbox™
|
| appcoef | 1-D approximation coefficients |
Wavelet Toolbox™
|
| appcoef2 | 2-D approximation coefficients |
Wavelet Toolbox™
|
| append | Group LTI models by appending their inputs and outputs |
Control System Toolbox™
|
| Append | Append data to data set |
Model-Based Calibration Toolbox™
|
| applycform | Apply device-independent color space transformation |
Image Processing Toolbox™
|
| applylut | Neighborhood operations on binary images using lookup tables |
Image Processing Toolbox™
|
| aptknt | Acceptable knot sequence |
Spline Toolbox™
|
| ar | Estimate parameters of AR model for scalar time series returning idpoly object |
System Identification Toolbox™
|
| arburg | Estimate AR model parameters using Burg method |
Signal Processing Toolbox™
|
| arcgridread | Read gridded data set in Arc ASCII Grid Format |
Mapping Toolbox™
|
| archtest | Run Engle's hypothesis test to detect presence of ARCH/GARCH effects |
GARCH Toolbox™
|
| arcov | Estimate AR model parameters using covariance method |
Signal Processing Toolbox™
|
| area | Create filled area 2-D plot |
Fixed-Point Toolbox™
|
| area | Filled area 2-D plot |
MATLAB®
|
| areaint | Surface area of polygon on sphere or ellipsoid |
Mapping Toolbox™
|
| areamat | Surface area covered by nonzero values in binary data grid |
Mapping Toolbox™
|
| areaquad | Surface area of latitude-longitude quadrangle |
Mapping Toolbox™
|
| argnames | Input argument names of cfit or fittype object |
Curve Fitting Toolbox™
|
| arith2geom | Arithmetic to geometric moments of asset returns |
Financial Toolbox™
|
| arithdeco | Decode binary code using arithmetic decoding |
Communications Toolbox™
|
| arithenco | Encode sequence of symbols using arithmetic coding |
Communications Toolbox™
|
| Arithmetic Operations | Perform arithmetic operations on symbols |
Symbolic Math Toolbox™
|
| Arithmetic Operators + - * / \ ^ ' | Matrix and array arithmetic |
MATLAB®
|
| armax | Estimate parameters of ARMAX or ARMA model returning idpoly object |
System Identification Toolbox™
|
| armcov | Estimate AR model parameters using modified covariance method |
Signal Processing Toolbox™
|
| arrayfun | Apply function to each element of array |
MATLAB®
|
| arx | Estimate parameters of ARX or AR model using least squares returning idpoly or idarx object |
System Identification Toolbox™
|
| arxdata | ARX parameters from multiple-output idarx or single-output idpoly objects with variance information |
System Identification Toolbox™
|
| arxstruc | Compute and compare loss functions for single-output ARX models |
System Identification Toolbox™
|
| aryule | Estimate AR model parameters using Yule-Walker method |
Signal Processing Toolbox™
|
| ascii | Set FTP transfer type to ASCII |
MATLAB®
|
| ascii2fts | Create financial time series object from ASCII data file |
Financial Toolbox™
|
| asec | Inverse secant; result in radians |
MATLAB®
|
| asecd | Inverse secant; result in degrees |
MATLAB®
|
| asech | Inverse hyperbolic secant |
MATLAB®
|
| ashow | Show algebraic loop |
Simulink®
|
| asianbycrr | Price Asian option from CRR binomial tree |
Financial Derivatives Toolbox™
|
| asianbyeqp | Price Asian option from EQP binomial tree |
Financial Derivatives Toolbox™
|
| asianbyitt | Price Asian options using implied trinomial tree (ITT) |
Financial Derivatives Toolbox™
|
| asin | Inverse sine; result in radians |
MATLAB®
|
| asind | Inverse sine; result in degrees |
MATLAB®
|
| asinh | Inverse hyperbolic sine |
MATLAB®
|
| assema | Assemble area integral contributions |
Partial Differential Equation Toolbox™
|
| assemb | Assemble boundary condition contributions |
Partial Differential Equation Toolbox™
|
| assempde | Assemble stiffness matrix and right side of PDE problem |
Partial Differential Equation Toolbox™
|
| assert | Generate error when condition is violated |
MATLAB®
|
| assignin | Assign value to variable in specified workspace |
MATLAB®
|
| assignmentquantizer | Assignment quantizer object of fi object |
Fixed-Point Toolbox™
|
| atan | Inverse tangent; result in radians |
MATLAB®
|
| atan2 | Four-quadrant inverse tangent |
MATLAB®
|
| atand | Inverse tangent; result in degrees |
MATLAB®
|
| atanh | Inverse hyperbolic tangent |
MATLAB®
|
| atmoscira | Use COSPAR International Reference Atmosphere 1986 model |
Aerospace Toolbox
|
| atmoscoesa | Use 1976 COESA model |
Aerospace Toolbox
|
| atmosisa | Use International Standard Atmosphere model |
Aerospace Toolbox
|
| atmoslapse | Use Lapse Rate Atmosphere model |
Aerospace Toolbox
|
| atmosnonstd | Use climatic data from MIL-STD-210 or MIL-HDBK-310 |
Aerospace Toolbox
|
| atmosnrlmsise00 | Implement mathematical representation of 2001 United States Naval Research Laboratory Mass Spectrometer and Incoherent Scatter Radar Exosphere |
Aerospace Toolbox
|
| atmospalt | Calculate pressure altitude based on ambient pressure |
Aerospace Toolbox
|
| atomiccomp | Calculate atomic composition of protein |
Bioinformatics Toolbox™
|
| atrace | Set algebraic loop trace level |
Simulink®
|
| attachConfigSet | Associate configuration set or configuration reference with model |
Simulink®
|
| attachConfigSetCopy | Copy configuration set or configuration reference and associate it with model |
Simulink®
|
| AttachData | Attach data from project to test plan |
Model-Based Calibration Toolbox™
|
| attachToModel (AUTOSAR) | Attach RTW.AutosarInterface object to model |
Real-Time Workshop® Embedded Coder™
|
| attachToModel (Function Prototype Control) | Attach model-specific C function prototype to loaded ERT-based Simulink® model |
Real-Time Workshop® Embedded Coder™
|
| attr | Retrieve attributes of columns in fetched data set |
Database Toolbox™
|
| audioplayer | Create audio player object |
MATLAB®
|
| audiorecorder | Create audio recorder object |
MATLAB®
|
| aufinfo | Information about NeXT/SUN (.au) sound file |
MATLAB®
|
| augknt | Augment knot sequence |
Spline Toolbox™
|
| Augment | Add design points |
Model-Based Calibration Toolbox™
|
| augstate | Append state vector to output vector |
Control System Toolbox™
|
| augw | State-space or transfer function plant augmentation for use in weighted mixed-sensitivity H and H2 loopshaping design |
Robust Control Toolbox™
|
| auread | Read NeXT/SUN (.au) sound file |
MATLAB®
|
| autocorr | Plot or return computed sample autocorrelation function |
GARCH Toolbox™
|
| autofixexp | Automatically change scaling of fixed-point data types |
Simulink® Fixed Point™
|
| autoscale | Automatic dynamic range scaling |
Filter Design Toolbox™
|
| auwrite | Write NeXT/SUN (.au) sound file |
MATLAB®
|
| aveknt | Provide knot averages |
Spline Toolbox™
|
| avhrrgoode | Read AVHRR data product stored in Goode Projection |
Mapping Toolbox™
|
| avhrrlambert | Read AVHRR data product stored in eqaazim projection |
Mapping Toolbox™
|
| avifile | Create new Audio/Video Interleaved (AVI) file |
MATLAB®
|
| aviinfo | Information about Audio/Video Interleaved (AVI) file |
MATLAB®
|
| aviread | Read Audio/Video Interleaved (AVI) file |
MATLAB®
|
| awgn | Add white Gaussian noise to signal |
Communications Toolbox™
|
| axes | Create axes graphics object |
MATLAB®
|
| axes2ecc | Eccentricity of ellipse with given axis lengths |
Mapping Toolbox™
|
| axes2pix | Convert axes coordinates to pixel coordinates |
Image Processing Toolbox™
|
| axesm | Define map axes and set map properties |
Mapping Toolbox™
|
| axesm, axesmui | Define map axes and modify map projection and display properties |
Mapping Toolbox™
|
| axesscale | Resize axes for equivalent scale |
Mapping Toolbox™
|
| axis | Axis scaling and appearance |
MATLAB®
|
| azimuth | Azimuth between points on sphere or ellipsoid |
Mapping Toolbox™
|
| bafter | Insert breakpoint after specified method |
Simulink®
|
| balance | Diagonal scaling to improve eigenvalue accuracy |
MATLAB®
|
| balancmr | Balanced model truncation via square root method |
Robust Control Toolbox™
|
| balreal | Gramian-based input/output balancing of state-space realizations |
Control System Toolbox™
|
| balred | Model order reduction |
Control System Toolbox™
|
| balred | Reduce model order (requires Control System Toolbox™ product) |
System Identification Toolbox™
|
| bandwidth | Frequency response bandwidth |
Control System Toolbox™
|
| bar | Create vertical bar graph |
Fixed-Point Toolbox™
|
| bar, barh | Bar chart |
Financial Toolbox™
|
| bar, barh | Plot bar graph (vertical and horizontal) |
MATLAB®
|
| bar3, bar3h | 3-D bar chart |
Financial Toolbox™
|
| bar3, bar3h | Plot 3-D bar chart |
MATLAB®
|
| barh | Create horizontal bar graph |
Fixed-Point Toolbox™
|
| barrierbycrr | Price barrier option from CRR binomial tree |
Financial Derivatives Toolbox™
|
| barrierbyeqp | Price barrier option from EQP binomial tree |
Financial Derivatives Toolbox™
|
| barrierbyitt | Price barrier options using implied trinomial tree (ITT) |
Financial Derivatives Toolbox™
|
| barthannwin | Modified Bartlett-Hann window |
Signal Processing Toolbox™
|
| bartlett | Bartlett window |
Signal Processing Toolbox™
|
| barttest | Bartlett's test |
Statistics Toolbox™
|
| base2dec | Convert base N number string to decimal number |
MATLAB®
|
| basecount | Count nucleotides in sequence |
Bioinformatics Toolbox™
|
| baselookup | Find nucleotide codes, integers, names, and complements |
Bioinformatics Toolbox™
|
| batch | Run a batch MATLAB® pool job |
Parallel Computing Toolbox™
|
| bbdesign | Box-Behnken design |
Statistics Toolbox™
|
| bchdec | BCH decoder |
Communications Toolbox™
|
| bchenc | BCH encoder |
Communications Toolbox™
|
| bchgenpoly | Generator polynomial of BCH code |
Communications Toolbox™
|
| bchnumerr | Number of correctable errors for BCH code |
Communications Toolbox™
|
| bdclose | Close any or all Simulink® system windows unconditionally |
Simulink®
|
| bdIsLoaded | Whether block diagram is in memory |
Simulink®
|
| bdroot | Return name of top-level Simulink® system |
Simulink®
|
| bdschur | Block-diagonal Schur factorization |
Control System Toolbox™
|
| bdtprice | Instrument prices from BDT interest-rate tree |
Financial Derivatives Toolbox™
|
| bdtsens | Instrument prices and sensitivities from BDT interest-rate tree |
Financial Derivatives Toolbox™
|
| bdttimespec | Specify time structure for BDT interest-rate tree |
Financial Derivatives Toolbox™
|
| bdttree | Construct BDT interest-rate tree |
Financial Derivatives Toolbox™
|
| bdtvolspec | Specify BDT interest-rate volatility process |
Financial Derivatives Toolbox™
|
| beep | Produce beep sound |
MATLAB®
|
| BeginEdit | Begin editing session on data object |
Model-Based Calibration Toolbox™
|
| bench | MATLAB Benchmark |
MATLAB®
|
| berawgn | Bit error rate (BER) for uncoded AWGN channels |
Communications Toolbox™
|
| bercoding | Bit error rate (BER) for coded AWGN channels |
Communications Toolbox™
|
| berconfint | Bit error rate (BER) and confidence interval of Monte Carlo simulation |
Communications Toolbox™
|
| berfading | Bit error rate (BER) for Rayleigh and Rician fading channels |
Communications Toolbox™
|
| berfit | Fit curve to nonsmooth empirical bit error rate (BER) data |
Communications Toolbox™
|
| bersync | Bit error rate (BER) for imperfect synchronization |
Communications Toolbox™
|
| bertool | Open bit error rate analysis GUI (BERTool) |
Communications Toolbox™
|
| besselap | Bessel analog lowpass filter prototype |
Signal Processing Toolbox™
|
| besself | Bessel analog filter design |
Signal Processing Toolbox™
|
| besselh | Bessel function of third kind (Hankel function) |
MATLAB®
|
| besseli | Modified Bessel function of first kind |
MATLAB®
|
| besselj | Bessel function of first kind |
MATLAB®
|
| besselk | Modified Bessel function of second kind |
MATLAB®
|
| bessely | Bessel function of second kind |
MATLAB®
|
| bestblk | Determine optimal block size for block processing |
Image Processing Toolbox™
|
| BestDesign | Best design in test plan |
Model-Based Calibration Toolbox™
|
| bestlevt | Best level tree wavelet packet analysis |
Wavelet Toolbox™
|
| bestrowid | Unique identifier for row in database table |
Database Toolbox™
|
| besttree | Best tree wavelet packet analysis |
Wavelet Toolbox™
|
| beta | Beta function |
MATLAB®
|
| betacdf | Beta cumulative distribution function |
Statistics Toolbox™
|
| betafit | Beta parameter estimates |
Statistics Toolbox™
|
| betainc | Incomplete beta function |
MATLAB®
|
| betainv | Beta inverse cumulative distribution function |
Statistics Toolbox™
|
| betalike | Beta negative log-likelihood |
Statistics Toolbox™
|
| betaln | Logarithm of beta function |
MATLAB®
|
| betapdf | Beta probability density function |
Statistics Toolbox™
|
| betarnd | Beta random numbers |
Statistics Toolbox™
|
| betastat | Beta mean and variance |
Statistics Toolbox™
|
| beytbill | Bond equivalent yield for Treasury bill |
Financial Toolbox™
|
| bi2de | Convert binary vectors to decimal numbers |
Communications Toolbox™
|
| bicg | Biconjugate gradients method |
MATLAB®
|
| bicgstab | Biconjugate gradients stabilized method |
MATLAB®
|
| bilin | Multivariable bilinear transform of frequency (s or z) |
Robust Control Toolbox™
|
| bilinear | Bilinear transformation method for analog-to-digital filter conversion |
Signal Processing Toolbox™
|
| bin | Binary representation of stored integer of fi object |
Fixed-Point Toolbox™
|
| bin2dec | Convert binary number string to decimal number |
MATLAB®
|
| bin2gray | Convert positive integers into corresponding Gray-encoded integers |
Communications Toolbox™
|
| bin2num | Convert two's complement binary string to number using quantizer object |
Fixed-Point Toolbox™
|
| binary | Set FTP transfer type to binary |
MATLAB®
|
| binblockread | Read binblock data from instrument |
Instrument Control Toolbox™
|
| binblockwrite | Write binblock data to instrument |
Instrument Control Toolbox™
|
| binocdf | Binomial cumulative distribution function |
Statistics Toolbox™
|
| binofit | Binomial parameter estimates |
Statistics Toolbox™
|
| binoinv | Binomial inverse cumulative distribution function |
Statistics Toolbox™
|
| binopdf | Binomial probability density function |
Statistics Toolbox™
|
| binornd | Binomial random numbers |
Statistics Toolbox™
|
| binostat | Binomial mean and variance |
Statistics Toolbox™
|
| binprice | Binomial put and call pricing |
Financial Toolbox™
|
| bintprog | Solve binary integer programming problems |
Optimization Toolbox™
|
| binvec2dec | Convert binary vector to decimal value |
Data Acquisition Toolbox™
|
| biograph | Create biograph object |
Bioinformatics Toolbox™
|
| biorfilt | Biorthogonal wavelet filter set |
Wavelet Toolbox™
|
| biorwavf | Biorthogonal spline wavelet filters |
Wavelet Toolbox™
|
| biplot | Biplot |
Statistics Toolbox™
|
| bitand | Bitwise AND of two fi objects |
Fixed-Point Toolbox™
|
| bitand | Bitwise AND |
MATLAB®
|
| bitandreduce | Bitwise AND of consecutive range of bits |
Fixed-Point Toolbox™
|
| bitcmp | Bitwise complement of fi object |
Fixed-Point Toolbox™
|
| bitcmp | Bitwise complement |
MATLAB®
|
| bitconcat | Concatenate bits of fi objects |
Fixed-Point Toolbox™
|
| biterr | Compute number of bit errors and bit error rate (BER) |
Communications Toolbox™
|
| bitget | Bit at certain position |
Fixed-Point Toolbox™
|
| bitget | Bit at specified position |
MATLAB®
|
| bitmax | Maximum double-precision floating-point integer |
MATLAB®
|
| bitor | Bitwise OR of two fi objects |
Fixed-Point Toolbox™
|
| bitor | Bitwise OR |
MATLAB®
|
| bitorreduce | Bitwise OR of consecutive range of bits |
Fixed-Point Toolbox™
|
| bitreplicate | Replicate and concatenate bits of a fi object |
Fixed-Point Toolbox™
|
| bitrevorder | Permute data into bit-reversed order |
Signal Processing Toolbox™
|
| bitrol | Bitwise rotate left |
Fixed-Point Toolbox™
|
| bitror | Bitwise rotate right |
Fixed-Point Toolbox™
|
| bitset | Set bit at certain position |
Fixed-Point Toolbox™
|
| bitset | Set bit at specified position |
MATLAB®
|
| bitshift | Shift bits specified number of places |
Fixed-Point Toolbox™
|
| bitshift | Shift bits specified number of places |
MATLAB®
|
| bitsliceget | Consecutive slice of bits |
Fixed-Point Toolbox™
|
| bitsll | Bit shift left logical |
Fixed-Point Toolbox™
|
| bitsra | Bit shift right arithmetic |
Fixed-Point Toolbox™
|
| bitsrl | Bit shift right logical |
Fixed-Point Toolbox™
|
| bitxor | Bitwise exclusive OR of two fi objects | |
Store 
