47,170 results in File Exchange

RunLength

Version 1.2.0.0 by Jan

RunLength coding as fast MEX and M-code

validity and speed.Tested: Matlab 6.5, 7.7, 7.8, 7.13, WinXP/32, Win7/64 Compiler: LCC3.8, BCC5.5, OWC1.8, MSVC2008/2010Does not compile under LCC2.4 shipped with Matlab/32!Assumed Compatibility

  • 6.8K (All time)
  • 7 (Last 30 days)
  • 5.0 / 5
  • Community

  • 8 Apr 2017

Robust cost function for designing chamfer masks

Version 1.1 by Baraka Maiseli

This submission implements a robust cost function for designing chamfer masks

- FINDTHRESH77BE -- Computes allowable ranges of the local weight 'b'
- SEARCHINTEGERS55 -- Computes integer versions of the 5x5 Chamfer's real-valued local weights
- LOBESANGULAR77 -- Computes minor and major angular error lobes using 7x7 Chamfer mask
- LOBESCARTESIAN77 -- Computes edge geometry of a polygon described by 7x7 Chamfer mask
- This demo shows SMAPE/RLog error lobes in an octant portion of the chamfer polygon
- This demo shows SMAPE/RLog error lobes in an octant portion of the chamfer polygon
- This demo shows how SMAPE/RLog varies with the local weight 'b'in an octant portion of the chamfer polygon
- This demo shows SMAPE/RLog error lobes in an octant portion of the chamfer polygon
  • 80 (All time)
  • 1 (Last 30 days)
  • -- / 5
  • Community

  • 3 Apr 2017

Classic (Pre-R2008b) Default Desktop Layout

Version 1.0.0.1 by Peter Muellers

Makes the pre-R2008b (MATLAB 7.7) default desktop layout available on the Desktop Layout menu.

In MATLAB® 7.7 the default layout was changed. Choosing "Default" from the Desktop Layout menu now arranges desktop tools in three columns where previously they appeared in two columns. If you

  • 817 (All time)
  • 5 (Last 30 days)
  • -- / 5
  • Community

  • 1 Sep 2016

Automated Vehicle Perception System and Sensor Fusion

Version 1.0.1 by David Barnes

The University of Alabama’s EcoCAR Mobility Challenge CAV designs from Year 1 of the competition

This upload contains The University of Alabama’s designs from Year 1 of the EcoCAR Mobility Challenge competition. Included in these files are driving scenarios from the Driving Scenario Designer

  • 359 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 24 Jul 2019

VChooseK

Version 1.0.0.0 by Jan

Choose K elements from a vector - MEX: 100 times faster than NCHOOSEK

its specific job VChooseK is remarkably faster (see screen shot).Tested: Matlab 6.5, 7.7, 7.8, WinXPCompilers: BCC5.5, LCC2.4/3.8, Open Watcom 1.8Please run the unit-test TestVChooseK after compiling

  • 3.1K (All time)
  • 2 (Last 30 days)
  • 4.9 / 5
  • Community

  • 23 Dec 2009

Plot in Latex format

Version 3.0.0 by Jagadeesh Korukonda

This function extends the capabilities of the plot function in Matlab and enhances the visual output of a basic plot.

| %| #1 -- Extra Input(string array) | %| "XL" --------> Parameter used to define X-label

  • 36 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 1 Apr 2023

Breusch-Pagan test

Version 1.0.0 by Martin Magris

Breusch-Pagan test for heteroskedasticity in a linear regression model (original and Koenker's versions).

, R. (1981). "A note on studentizing a test for heteroskedasticity". Journal of Econometrics. 17 (1): 107–112. doi:10.1016/0304-4076(81)90062-2.

  • 612 (All time)
  • 9 (Last 30 days)
  • 5.0 / 5
  • Community

  • 4 May 2020

AMR-WT

Version 1.0.1 by Tao Lei

Adaptive Morphological Reconstruction for Seeded Image Segmentation. It is published in 2020-TIP.

  • 208 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 27 Apr 2020

DataHash

Version 1.7.1 by Jan

MD5 or SHA hash for array, struct, cell or file

numeric vector.EXAMPLES:Default: MD5, hex: DataHash([]) % 7de5637fd217d0e44e0082f4d79b3e73SHA-1, Base64: S.a = uint8([]); S.b = {{1:10}, struct('q', uint64(415))}; DataHash(S, 'base64

  • 14.5K (All time)
  • 18 (Last 30 days)
  • 5.0 / 5
  • Community

  • 19 May 2019

Horned Lizard Optimization Algorithm (HLOA)

Version 1.0.1 by Hernan Peraza

A Novel Metaheuristic Inspired by Horned Lizard Defense Tactics

dimensions 50 and 100.DOI: 10.1007/s10462-023-10653-7https://link.springer.com/article/10.1007/s10462-023-10653-7

  • 673 (All time)
  • 10 (Last 30 days)
  • 5.0 / 5
  • Community

  • 16 Feb 2024

An Improved Power-Quality 30-Pulse AC–DC for Varying Loads

Version 1.0.1 by Dr. T Vijay Muni

An Improved Power-Quality 30-Pulse AC–DC for Varying Loads

  • 360 (All time)
  • 3 (Last 30 days)
  • 5.0 / 5
  • Community

  • 21 Aug 2020

CStrAinBP

Version 1.1.0.0 by Jan

Overlapping elements of 2 cell strings. 10-20 times faster than INTERSECT/ISMEMBER/SETDIFF.

'}, {'a', 'c', 'd', 'a', 'b'}) replies: AI = [1, 2, 4] and: BI = [1, 5, 1] [AI, BI] = CStrAinBP({'a', 'b', 'A'}, {'a', 'c', 'a', 'B', 'b'}, 'i') replies: AI = [1, 2, 3] and: BI = [1, 4, 1

  • 1.7K (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 12 Sep 2009

ANN MATLAB code.

Version 2.2.1 by Mehdi Ghasri

Modeling Using Artificial Neural Network

concrete columns confined with FRP.Compressive-strengthVerision 2.2.1: Net--3/2

  • 1.2K (All time)
  • 13 (Last 30 days)
  • 5.0 / 5
  • Community

  • 5 Feb 2023

FilterM

Version 1.0.0.0 by Jan

A faster FILTER and FILTFILT: Speedup factor 2.5 to 25

uTest_FiltFiltM to check validity and speed.Tested: Matlab 6.5, 7.7, 7.8, WinXP, 32bit Compiler: LCC2.4/3.8, BCC5.5, OWC1.8, MSVC2008Assumed Compatibility: higher Matlab versions, Mac, Linux, 64bitThis is

  • 5.7K (All time)
  • 7 (Last 30 days)
  • 4.8 / 5
  • Community

  • 20 Jul 2011

PIVlab - particle image velocimetry (PIV) tool with GUI

Version 3.12.001 by William Thielicke

Easy to use, GUI based tool to capture, analyze, validate, postprocess, visualize and simulate PIV data. http://PIVlab.de

online](https://matlab.mathworks.com/open/fileexchange/v1?id=27659) (no hardware interaction, free Mathworks account

- Create structures to define interfaces found in 'sc2_cammatlab'.
- Create structures to define interfaces found in 'sc2_cammatlab'.
- Improved 2D Streamlines.
- Export a figure.
- Upsample input signal.
- Wavelet filters.
- This script can be used to check whether PIVlab generates high quality results on a specific harware / OS / MATLAB combination
  • 119.6K (All time)
  • 1.1K (Last 30 days)
  • 4.9 / 5
  • Community

  • 24 Sep 2025

Physical-Concepts-Scinet

Version 1.0.0 by Moubarak Gado

In this repository, we implemented and trained the SciNet network described in arXiv:1807.10300v3.

project Scinet.prj(optional) run "Read instructions" from project shortcuts panelMathWorks Products (http://www.mathworks.com)Requires MATLAB release R2019b or newerDeep Learning Toolbox™Getting StartedRun

  • 49 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 11 Jun 2021

Radioactive decay & Bateman equation

Version 1.0.1 by S-D

A tutorial on how to solve differential equations with MATLAB in the context of radioactive decay according to Bateman.

  • 433 (All time)
  • 4 (Last 30 days)
  • 5.0 / 5
  • Community

  • 14 Oct 2018

PicoLog 1000 Series MATLAB Examples

Version 1.1.0.1 by Pico Technology

MATLAB examples for use with PicoLog 1000 Series data loggers.

- PL1000Config Configure path information
- Converts milliVolt value to ADC count for PicoLog 1000 series
- PicoLog 1000 Series Data Logger Streaming Example
- Create structures to define interfaces found in 'pl1000Api'.
- Create structures to define interfaces found in 'pl1000Api'.
- Create structures to define interfaces found in 'pl1000Api'.
  • 131 (All time)
  • 2 (Last 30 days)
  • 5.0 / 5
  • Community

  • 24 Sep 2018

CUtrace

Version 11.0.0.0 by Scott Rowe

A Parallel Ray Tracing GUI for Radiation Analysis and View Factor Determination

  • 773 (All time)
  • 8 (Last 30 days)
  • 5.0 / 5
  • Community

  • 14 Sep 2020

Matlab_Python_3D_toolbox

Version 1.0.0 by CLEDAT Emmanuel

3D convertor from Matlab to SketchUp, permits to create visualization for debugging purposes, data analysis and results rendering.

- RUBY_ANTENNA Writes an antenna symbol to the given file.
- RUBY_CREATE Opens and initializes ruby file, returning file structure
- RUBY_ELLIPSOID adds an error ellipsoid to the given file
- RUBY_NEWLINE Helper function, writes newline charachters (\r\n)
- RUBY_PLANE adds a plane to the given file
- RUBY_POSE Writes a pose to the given file
- M_TO_RODRIGES Lie-Logarithm helper function
- RUBY_TIN draws DEM (Digital Elevation Model) having TIN structure
- RUBY_RGB_COLOR Helper function, creates RGB-string for given color
- RUBY_CHECK_COLOR Helper function, returns true for valid color argument
  • 294 (All time)
  • 2 (Last 30 days)
  • 5.0 / 5
  • Community

  • 31 May 2019

MemReadEDF

Version 1.0.3 by Darion Toutant

A speedy EDF+ reader that also accommodates putting sections of the data record into memory.

] = MemReadEDF(EDFfile, 'time', [0 60], 'channels', [1:12], 'annotations') Currently there are 3 optional parameters provided for reading information from the EDF+ file. The 'time' and 'channels

  • 47 (All time)
  • 3 (Last 30 days)
  • 5.0 / 5
  • Community

  • 16 Nov 2022

Multi-Objective Atomic Orbital Search (MOAOS)

Version 1.0.1 by Nima Khodadadi

Multi-Objective Atomic Orbital Search (MOAOS) for Global and Engineering Design Optimization

  • 540 (All time)
  • 8 (Last 30 days)
  • 5.0 / 5
  • Community

  • 13 Jun 2024

nck

Version 1.0.5 by JaeHyeok Park

Efficient calculation of combination or binomial coefficient, without direct calculating factorials.

below)https://kr.mathworks.com/matlabcentral/fileexchange/105320-nck?tab=discussions#discussions_2429840usage:>> nck(7,5)21Inspired by python reduce implementationmodified using better alrorithm

  • 27 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 22 Feb 2022

Economic Load Dispatch with Optimization Functions

Version 1.0.0 by Praviraj PG

A simple code for Economic Load Dispatch using Optimization Functions available in MATLAB or GNU Octave.

  • 643 (All time)
  • 9 (Last 30 days)
  • 5.0 / 5
  • Community

  • 22 Oct 2019

Flexible Bayesian penalized regression modelling

Version 1.9.1.0 by Statovic

Bayesian lasso, horseshoe and horseshoe+ linear, logistic regression and count regression

- print summary statistics.
- samples the hyperparameter xi for all models.
- computes the rank of each predictor using the BFR algorithm.
- generate random variates from the inverse Gaussian distribution.
- generate a [a x b] random matrix from Laplace(m, s).
- sampler for multivariate Gaussians.
- Bayesian linear and logistic regression.
- generate random variates from the exponential distribution.
- Remove effects of standardisation on input data.
- sampler for multivariate Gaussians.
- samples the regression parameters beta.
- print string code n times to a string.
- computes effective sample size.
- standardise input data.
- compute posterior expected degrees-of-freedom for a model and
- pad a string with spaces to centre it string
- update tuning parameters for a Metropolis-Hastings sampler
- Expand a vector into a matrix of Legendre polynomials
- forms the diagonal entries of the Lambda regularisation matrix
- draws samples from an inverse gamma distribution
- create a tuning structure for adaptive step-size tuning
- produce predictions
- Example 15
- Example 11
- Example 8
- Example 4
- Example 14
- Example 1
- Example 6
- Example 3
- Example 13
- Example 7
- Example 12
- Example 9
- Example 2
- Example 16
- Example 5
- Example 10
- samples the hyperparameters w2 for the log-t logscale prior.
- samples the hyperparameters lambda2 for HS model.
- samples the hyperparameters omega2 for the Laplace error model.
- samples the hyperparameters omega2 for logistic regression.
- samples the global variance hyperparameter for all models.
  • 1.4K (All time)
  • 3 (Last 30 days)
  • 4.9 / 5
  • Community

  • 30 Nov 2020

load frequency control in one area

Version 1.2.3 by Naeem GH

Supplemental Control for Enhancing Primary Frequency Response of DFIG-based Wind Farm

  • 577 (All time)
  • 6 (Last 30 days)
  • 5.0 / 5
  • Community

  • 3 Oct 2021

Western North American Power Grid Benchmark

Version 1.0.0.1 by Atieh Delavari

SimPowerSystems model of the 41-bus Western North American Power Grid

  • 1.5K (All time)
  • 5 (Last 30 days)
  • 5.0 / 5
  • Community

  • 9 Sep 2018

Double Side Band Suppressed Carrier (DSBSC) Modulation

Version 2.1.1 by Saptarshi Neogi

This file contains the MATLAB code for generation of DSBSC signal.

  • 985 (All time)
  • 3 (Last 30 days)
  • 5.0 / 5
  • Community

  • 27 Aug 2020

Backward Integration Solution to the SDDRE

Version 1.0.1 by Saeed Rafee Nekoo

The codes show backward integration simulation on mathematical dynamical models for SDDRE controller in regulation and tracking.

  • 22 (All time)
  • 2 (Last 30 days)
  • 5.0 / 5
  • Community

  • 30 Jul 2024

polyLegendre

Version 1.0.0 by Ethan Kubatko

Generates Legendre polynomials in MATLAB® polynomial form

  • 35 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 14 Sep 2021

mGstat

Version 1.1 by Thomas Mejer Hansen

Some tools for geostatistical analysis

- set/get the status-bar of Matlab desktop or a figure
- : Puts a title above all subplots.
  • 801 (All time)
  • 10 (Last 30 days)
  • 5.0 / 5
  • Community

  • 13 Sep 2022

Speckle Autocorrelation

Version 1.0.0 by Marcoleonetti1

Perform the Fourier transform based autocorrelation of grayscale frames to measure the speckle size. Also work with stacks of images

  • 432 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 24 Jun 2021

ac voltage controller

Version 1.0.0 by Dr.GADDALA JAYA RAJU

ac voltage controller

  • 327 (All time)
  • 3 (Last 30 days)
  • 5.0 / 5
  • Community

  • 30 Nov 2019

TRT Filter for Impulse Noise Removal

Version 1.1 by Dang N. H. Thanh

Thresholding and Regularization Techniques for Image Denoising

TRT_FilterThresholding and Regularization Techniques for Image DenoisingGUI requires MATLAB 2021bCite the paper:Nguyen N. Hien, Dang N.H. Thanh, Ugur Erkan, Joao M.R.S. Tavares. “Image Noise Removal

  • 47 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 14 Jul 2022

clabel_along

Version 1.0 by Rob McDonald

Label contours along a curve in MATLAB

- Label contours along a curve
  • 39 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 25 Mar 2021

Draw Sketch Profile Cookie Cupcake Gear Wavy Circular Shapes

Version 1.0.0 by AMITAVA BISWAS

Draw Sketch Profile Cookie Cupcake Gear Wavy Circular Shapes

  • 16 (All time)
  • 2 (Last 30 days)
  • 5.0 / 5
  • Community

  • 20 May 2020

FIF

Version 2.12.1 by Antonio

Fast Iterative Filtering

Fast Iterative Filtering for the decompostion of non-stationary signals [1,2,3].Please refer to "Example_v8.m" and "Example_real_life_v6.m" for examples of how to use the code.It is based on FFT

  • 421 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 13 Feb 2021

Human Circulatory System with Electric Components

Version 3.2 by Jorge Torres Gómez

This is a Simulink project to provide the values of pressure and flow in the human circulatory system with electric circuits components.

vessels in [1] and further discussed in [3]. We use the model for the heart following the mathematical model in [2].The electric parameters for the resistors, inductors, and capacitors are specified in the

- Apply colored hatched patterns to a figure
- Predefined hatch patterns
  • 582 (All time)
  • 5 (Last 30 days)
  • 5.0 / 5
  • Community

  • 3 Jun 2022

An Introduction to Sliding mode Control: Basics

Version 1.0.2 by JKD Power and Energy Solutions

An Introduction to Sliding mode Control:Basics

https://youtu.be/e-wzvbYwWN8https://youtu.be/VNB_SyAvB68https://youtu.be/vZIcVabXysgAdaptive Sliding-Mode Control for Boost DC–DC Converters: MATLAB Implementationhttps://youtu.be/u2nr0O2aitcA High-Speed Sliding-Mode Observer for the Sensorless Speed Control of a

  • 3.2K (All time)
  • 7 (Last 30 days)
  • 5.0 / 5
  • Community

  • 3 Nov 2023

bbrister/SIFT3D

Version 1.4.5.0 by Blaine Rister

3D SIFT keypoints and feature descriptors, image registration, and I/O for DICOM, NIFTI.

- helper class to parse SIFT3D options. This class inherits
- a test suite for SIFT3D.
- 3D(coords, scales, orientations) Create an array of Keypoint
- (im) Read a 3D image from a file.
- (im) Write a 3D image to a file.
- (im, options) Detect Sift3D keypoints in an image.
- (keys, im, units) Extract Sift3D descriptors from keypoints.
- helper function to check the validity of the 'units' argument
- (src, ref, options) register a pair of
- (desc1, desc2)
  • 2K (All time)
  • 2 (Last 30 days)
  • 5.0 / 5
  • Community

  • 28 Aug 2020

OpenOCL - Open Optimal Control Library

Version 7.07 by Jonas

Optimal Control toolbox for Matlab. Software for trajectory optimization and Model-predictive control (MPC).

- ocl.Constraint
- Default implementation of arithemtic operations for
  • 1.3K (All time)
  • 9 (Last 30 days)
  • 5.0 / 5
  • Community

  • 24 May 2020

Quantile regression

Version 1.0.3 by Peter Xu

Quantile regression

  • 1K (All time)
  • 4 (Last 30 days)
  • 5.0 / 5
  • Community

  • 20 Jul 2022

Covid-19 Detector

Version 1.0.2 by kunal gokhe

This app detect the virus using ML technique !

- Filter BW image using auto-generated code from imageRegionAnalyzer app.
- Segment image using auto-generated code from imageSegmenter app
  • 558 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 22 Nov 2023

MNI2FS: High Resolution Surface Rendering of MNI Registered Volumes

Version 1.4.0.0 by Darren Price

MNI2FS: High Resolution Surface Rendering of MNI Space Volumes

- Render figure with anti-aliasing.
- - decompress gzipped stream of bytes
- - losslessly compress data using gzip
- GIfTI object in a GIfTI format file
- method for GIfTI objects
- Geometry file format class
- method for GIfTI objects
- Perform base64 encoding on a string.
- Perform base64 decoding on a string.
- Calls a local pdftops executable with the input command
- Lock colors of plot, enabling multiple colormaps per figure. (v2.3)
- Restore colors of a plot to original indexed color. (v2.3)
- Improves the line style of eps files generated by print
  • 647 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 3 Sep 2021

Euler-Bernoulli beam

Version 1.2.0 by Andreas Döring

Analytical solution for Euler-Bernoulli beam with n simple supports.

  • 527 (All time)
  • 4 (Last 30 days)
  • 5.0 / 5
  • Community

  • 8 May 2024

Panic Simulator

Version 1.1.0.0 by Julian

Simulates panic behaviour in modifiable rooms with one exit

- Should be executed after time step of ode
- Panic Simulator
- plots a circle with center in [x,y] and radius r
- MATLAB code for settingsGui.fig
- plots all agents and columns in the range [xMax, yMax]
- executes all necessary tasks when a reset of the arena is
- plots a collegeblock like background with 1 m between each block
- Find java objects contained within a specified java container or Matlab GUI handle
- Displays current automatization process in infoline
- validates if settings is of right format
- validates if column matrix is of right format
- 1 plots the outcome of the velocity automatization process
- Switches some warnings off
- plots agents, columns and the grid
- updates the position of the agent circles and their pressure
- creates an automateObj, dependent on settings
- validates if agent matrix is of right format
- Resets all indices of the automateObj to initial
- called inside ode solver, if one of value goes to 0, an
- calculates arena width dependent on agent number and arena
- returns time in format mm:ss.ss
- returns a color related to a pressure value
- MATLAB code for arenaEditor.fig
- calculates the new agent matrix after one time step with ode23
- validates if exitCoord is of right format
- validates if STR can be transformed to number and is of desired format
- changes xMax to desired value
- calls the updateAgent function and plots the new matrix if
- plots the green-red exit line from (x1,y1) to (x2,y2)
- validates if automateObj is of right format
- MATLAB code for PanicSimulatorGui.fig
- reactivates all ui controls previously deactivated
- plots a wall line from (x1,y1) to (x2,y2)
- returns true when [c1,c2] is left of line defined by end points
- changes NAgent in settings to desired value, also adapts xMax
- validates if NUM is of desired format
- Deactivates all Ui Controls
- validates if wallLines is of right format
- plots a circle with center in [x,y] and radius r
- executes all necessary tasks when a reset
- MATLAB code for automateSettingsGui.fig
- plots a blue column with center in [x,y] and radius r
- Resets variables of simulation obj, like time...
- does all necessary stuff when timer is first started
  • 1.2K (All time)
  • 2 (Last 30 days)
  • 5.0 / 5
  • Community

  • 4 Jun 2014

jarirepo/feasrgn

Version 1.2.0.0 by Jari Repo

Finds the feasible region from a set of constant, linear and nonlinear inequalities

Piecewise linear feasible regionFinds the piecewise linear feasible region from a set of constraints functions (inequalities) derived within the actual problem domain. y 'sign' f1(x) y 'sign

- Inequality sign enumeration
- Piecewise linear feasible region based on a set of inequalities
- Feasible region plot
- Represents an inequality of the form y 'sign' f(x)
- Predefined feasible region examples
  • 173 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 8 Dec 2016

Time-frequency-multisqueezing Transform

Version 1.0.2 by YuGang

业务范围包括但不限于，生物/地震/机械/振动/声音/语音等多种领域中的信号处理问题。（最新文章源码以及c或者python版本，可联系， 手机号：15064155055 微信号：yg694722435 邮箱：yugang2010@163.com

  • 575 (All time)
  • 5 (Last 30 days)
  • 5.0 / 5
  • Community

  • 3 Feb 2024

2D Vortex Core Tracking - Gamma 1 - Super Fast

Version 1.1 by Fernando Zigunov

Identifies 2D vortices using Gamma 1 from Graftieaux

, though, because it uses 4 nested for loops. Producing the gamma1 map can be done more efficiently in Matlab by realizing that the operations described in the Graftieaux's paper can be rearranged into two

  • 647 (All time)
  • 5 (Last 30 days)
  • 5.0 / 5
  • Community

  • 24 Jul 2020

Vehicle Dynamics - Lateral

Version 1.0.0.5 by André de Souza Mendes

Open Source Simulation Package for MATLAB

- Least squares fit of X-Y data to a circle.
- This template shows how to simulate a simple vehicle and plot the results.
- Functions for graphics generation.
- This template shows how to simulate an articulated vehicle and plot the results.
- Comparison between tire models.
- Vehicle dynamics simulator
- Tire abstract class
- Nonlinear relation between tire lateral force and slip angle expressed by a third order polinomial equation. This model is used by several authors [1] [2] [3].
- This template shows how to simulate an articulated vehicle in Simulink using a s-function.
- Kalman filter application for simple vehicle.
- Articulated vehicle abstract class.
- This script presents open-loop multi-axle steering of an articulated vehicle.
- Maneuver in circles of a nonlinear simple vehicle with Pacejka tire model.
- Linear relationship between tire lateral force and slip angle.
- This script presents open-loop multi-axle steering of an simple vehicle.
- This template shows how to simulate an articulated vehicle in Simulink using a s-function.
- Simple vehicle abstract class.
- Nonlinear relationship between tire lateral force and slip angle expressed by a semi-empirical model with experimental coefficients [1].
- Steering Control of Autonomous Vehicles in Obstacle Avoidance Maneuvers.
- Linear tire model
- Polynomial tire model
- Pacejka tire model
- Linear articulated bicycle model with 4 degrees of freedom.
- This example simulates an articulated vehicle with an open loop sinusoidal steering input.
- This example simulates a simple vehicle with an open loop sinusoidal steering input.
- Nonlinear simple vehicle model.
- Linear bicycle model with 3 degrees of freedom.
- This scipt derives the equations of motion from the nonlinear articulated vehicle model.
- This scipt derives the equations of motion from the nonlinear simple vehicle model.
- Nonlinear articulated vehicle model.
- Linear articulated vehicle model.
- Linear simple vehicle model.
- Maneuver in circles of a nonlinear simple vehicle model with Pacejka tire model.
- Nonlinear bicycle model nonlinear with 4 degrees of freedom.
  • 3.5K (All time)
  • 7 (Last 30 days)
  • 5.0 / 5
  • Community

  • 1 Feb 2023

Nutcracker Optimization Algorithm (NOA)

Version 1.0.1 by Reda Mohamed

Nutcracker Optimization Algorithm is a novel nature-inspired metaheuristic algorithm

, CEC-2017, and CEC-2020 and five real-world engineering design problems. NOA is compared with three classes of existing optimization algorithms: 1) SMA, GBO, EO, RUN, AVOA, RFO and GTO as recently-published

  • 1.1K (All time)
  • 13 (Last 30 days)
  • 5.0 / 5
  • Community

  • 14 Jun 2023

glerny/finnee

Version 3.0.0.0 by Guillaume Erny

Matlab toolbox for separation techniques hyphenated high resolution mass spectrometry

. Tutorials and detailed explanations can be found at https://finneeblog.wordpress.com/.# Finnee v3.1This is the final version for Finnee; it has been replaced by a new toolbox, Finnee2016, that make use of

- Decompress input bytes using ZLIB.
- Perform base64 decoding on a string.
  • 71 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 24 Dec 2016

Fast Global Stiffness Matrix Assembly

Version 1.0.2 by Ayad Al-Rumaithi

Generates global stiffness matrix from elements stiffness matrices in a fast way

  • 619 (All time)
  • 3 (Last 30 days)
  • 5.0 / 5
  • Community

  • 19 Sep 2024

MOTEO: multi-objective thermal exchange optimization

Version 1.0.1 by Nima Khodadadi

The algorithm is developed based on the concept of Newtonian cooling law.

%% Developed in MATLAB R2020b (MacOs-Monterey) %% %% Author and programmer

  • 383 (All time)
  • 2 (Last 30 days)
  • 5.0 / 5
  • Community

  • 13 Jun 2024

File downloader/uploader with progress monitor

Version 1.0.6.5 by Eivind Hennestad

Download/upload a file from/to the web with progress display using MATLAB's http web services.

(in seconds) for updating progress. Default = 1 second.ShowFilename : Whether to show name of uploaded file. Default = false.IndentSize : Size of indentation if displaying progress in command

- Upload a file to web while displaying progress.
- Download and save a file from web while displaying progress.
- Updates a progress monitor for file transfers.
  • 57 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 26 Sep 2024

AMPL Interface to MATLAB

Version 1.0.1.0 by Steve Grikschat

Connect MATLAB - Optimization Toolbox™ to the AMPL API for MATLAB

This package (AMPL interface to Optimization Toolbox) connects MATLAB – Optimization Toolbox™ to the AMPL API for MATLAB (version 1.3 or higher). It provides an interface to Optimization Toolbox

- Read an problem from an AMPL file or object.
- Matlab class that corresponds to an optimization problem
- Solve AMPL problem using Optimization Toolbox solvers
  • 662 (All time)
  • 2 (Last 30 days)
  • 5.0 / 5
  • Community

  • 6 Aug 2018

Fast FEM assembly: edge elements

Version 1.2.0.0 by Jan Valdman

Vectorized assembly of FEM matrices.

- Returns the values of the shape functions.
- Returns the gradients of the shape functions with
- Returns the gradients of the basis functions
  • 2.8K (All time)
  • 4 (Last 30 days)
  • 5.0 / 5
  • Community

  • 3 Aug 2018

Stereo triangulation

Version 1.3 by Manolis Lourakis

Reconstruct a set of points from their image projections

  • 765 (All time)
  • 2 (Last 30 days)
  • 5.0 / 5
  • Community

  • 17 Nov 2018

Matlab Mail Feedback

Version 1.2.0 by Daniele Mascali

Set of functions for receiving mail feedback from Matlab

Set of functions for receiving mail feedback from Matlab.1) sendstatus(to,verbose) sends the exit status of a script/function to the mail addresses specified in to. In case of failure the function

- (TO,DELTATIME) sends an email to TO to confirm the machine is
- (T) converts seconds to a readable format (DAY:HH:MM:SS.mmm)
- (TO,VERBOSE) sends an exit status report to the mail addresses
- uses matlab SENDMAIL function to send mail pre-compiled with a set
  • 67 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 12 Mar 2019

Autoencoder-based anomaly detection for sensor data

Version 1.1 by Antti

Demo that shows how to use auto-encoders to detect anomalies in sensor data

- neural network simulation function.
- Generate subsequence time series
  • 730 (All time)
  • 1 (Last 30 days)
  • 5.0 / 5
  • Community

  • 3 Jul 2020

Load more