% This M file creates the "LossSpec_Diode_Library.mat " file
% containing loss and thermal diode models provided in the
% "LossModelib.mdl' libray.
% Diode specifications are saved in the "LossSpec_Diode" structure.
%
% Data provided below for three different commercial
% IGBT/Diode half-bridge packs are extracted from manufacturer data sheets
% (see pdf files provided in the same directory).
% Pierre Giroux, Hydro-Quebec (IREQ), March 2012
%% How to to add your own diode specifications
% -------------------------------------------
% 1) Open the "LossModelib.mdl' library
% 2) Duplicate a cell containing specifications of one existing IGBT
% and insert it at the end of this file
% (see "Add your own specifications here" cell)
% 3) Modify this new set of data according to your specifications
% 4) Run this script file in order to update the "LossSpec_Diode_Library.mat " file
% 5) In the "LossModelib.mdl' library
% - select the IGBT or half-bridge model to update
% - open the Mask Editor
% - select "Diode_Type" parameter
% - In the "Popups" window, enter a new description
% after existing diode descriptions
% 6) Save the "LossModelib.mdl' library.
% Note: Future release of SPS will provide an easy-to-use GUI to add or
% edit device characteristics.
% Pierre Giroux, Hydro-Quebec (IREQ), March 2012
% If= Forward current (A)
% Vf= Forward voltage (V)
% Erec= Reverse recovery energy (mJ)
% Tj= Junction temperature (degrees Celsius)
% Vcc= Supply voltage (V)
% Note1: Reverse recovery energy (Erec)is function of Vcc, If and Tj
% Note2: Diode on-state losses = Vf (function of If and Tj) * If
%+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
clear all
%% Fuji Electric - Diode, IGBT Module, 2 in one-package, 600V, 150A
Type = 'Diode';
Manufacturer = 'Fuji Electric';
PartNo = '2MBI150U2A 060';
Description = 'Diode, IGBT Module, 2 in one-package, 600V, 150A';
% Typical reverse recovery energy (Erec) vs If
Vcc_Erec = 300;
Tj_Erec = [ 25 125 ];
If_Erec = [ 0 25 50 75 100 125 150 175 200 225 ];
Erec = [ 0 0.27 0.48 0.62 0.69 0.73 0.75 0.77 0.795 0.81
0 0.48 0.82 1.07 1.23 1.37 1.47 1.58 1.67 1.79 ];
%
% Diode - Typical on-state characteristics
Tj_OnState= [ 25 125 ];
If_OnState = [ 0 0.1 3 10 30 70 111 167 240 300 ];
Vf_OnState = [ 0 0.43 0.78 0.92 1.11 1.31 1.47 1.66 1.89 2.07
0 0.42 0.55 0.70 0.96 1.23 1.47 1.72 2.02 2.25 ];
%-------------------------------------------------------------------------
%
% Thermal Impedance:
%
Rth_jc=0.46; % Junction-to-Case thermal resistance(K/W)
% Based on transient thermal impedance vs. time curve
Cth_j=0.13; % Junction thermal capacitance (Joule/Kelvin)
%
%-------------------------------------------------------------------------
LossSpec_Diode(1)= struct('Type',Type, 'Manufacturer',Manufacturer, 'PartNo',PartNo, ...
'Description',Description, 'Vcc_Erec',Vcc_Erec, ...
'Tj_Erec',Tj_Erec, 'If_Erec',If_Erec, 'Erec',Erec, ...
'Tj_OnState',Tj_OnState, 'If_OnState',If_OnState, 'Vf_OnState',Vf_OnState, ...
'Rth_jc',Rth_jc, 'Cth_j',Cth_j);
%
clear Vcc_Erec Tj_Erec If_Erec Erec Tj_OnState ...
If_OnState Vf_OnState Manufacturer PartNo Description Type ...
Rth_jc Cth_j
%=========================end of specifications===========================
%% ABB - Diode, IGBT Module, ABB HiPak, 1700V, 800A
Type='Diode';
Manufacturer= 'ABB';
PartNo= '5SNE 0800M170100';
Description= 'Diode, IGBT Module, ABB HiPak, 1700V, 800A';
% For Tj=25 deg. C, manufacturer specifications provide Erec at only one current (800 A).
% The Erec values for Tj=25 deg. C and Tj=125 deg. C, 800 A specified below
% are used to deduce the Erec(Ic) curve @ Tj=25 deg. C from the Erec(Ic) curve @ Tj=125 deg. C
% assuming that Erec stays proportionnal to its value @ Tj= 125 deg. C
Tj_800A= [ 25 125 ]; % Junction temperature (C)
Erec_800A= [ 150 270]; % Reverse recovery energy at Tj_800A (mJ) for Ic=800A
%
% Typical reverse recovery energy (Erec) vs If
Vcc_Erec= 900;
Tj_Erec= [ 25 125 ];
If_Erec= [ 0 101 196 301 500 703 800 902 1100 1300 1500 1600 ];
% Erec @ 125 C (per data sheet curves)
Erec(2,:)= [ 0 82.0 115 145 201 245 270 282 309 330 340 342 ];
% Eon @ 25 C (calculated using data sheet spec at 25 C)
Erec(1,:)=Erec_800A(1)/Erec_800A(2) * Erec(2,:);
%
% Diode - Typical on-state characteristics
Tj_OnState= [ 25 125 ];
If_OnState = [ 0 0.01 96.4 142 195 259 365 500 669 900 1100 1400 1500];
Vf_OnState = [ 0 0.80 1.09 1.17 1.23 1.29 1.38 1.48 1.58 1.71 1.83 2.00 2.06
0 0.50 0.86 0.97 1.06 1.15 1.28 1.43 1.58 1.78 1.94 2.18 2.26 ];
%-------------------------------------------------------------------------
%
% Thermal Impedance:
%
Rth_jc=0.036; % Junction-to-Case thermal resistance(K/W)
% Based on transient thermal impedance vs. time curve
Cth_j=3.729; % Junction thermal capacitance (Joule/Kelvin)
%
%-------------------------------------------------------------------------
LossSpec_Diode(2)= struct('Type',Type, 'Manufacturer',Manufacturer, 'PartNo',PartNo, ...
'Description',Description, 'Vcc_Erec',Vcc_Erec, ...
'Tj_Erec',Tj_Erec, 'If_Erec',If_Erec, 'Erec',Erec, ...
'Tj_OnState',Tj_OnState, 'If_OnState',If_OnState, 'Vf_OnState',Vf_OnState, ...
'Rth_jc',Rth_jc, 'Cth_j',Cth_j);
%
clear Vcc_Erec Tj_Erec If_Erec Erec Tj_OnState ...
If_OnState Vf_OnState Manufacturer PartNo Description Type ...
Rth_jc Cth_j Tj_800A Erec_800A
%=========================end of specifications===========================
%% ABB - Diode, Half-bridge IGBT Module, 3300V, 250A;
Type='Diode';
Manufacturer= 'ABB';
PartNo= '5SNG 0250P330300';
Description= 'Half-bridge IGBT Module, 3300V, 250A';
% For Tj=25 deg. C, manufacturer specifications provide Erec at only one current (250 A).
% The Erec values for Tj=25 deg. C and Tj=125 deg. C, 250 A specified below
% are used to deduce the Erec(Ic) curve @ Tj=25 deg. C from the Erec(Ic) curve @ Tj=125 deg. C
% assuming that Erec stays proportionnal to its value @ Tj= 125 deg. C
Tj_250A= [ 25 125 ]; % Junction temperature (C)
Erec_250A= [ 165 280 ]; % Reverse recovery energy at Tj_250A (mJ) for If=250A
%
% Typical reverse recovery energy (Erec) vs If
Vcc_Erec= 1800;
Tj_Erec= [ 25 125 ];
If_Erec= [ 0 26.2 48.9 99 150 199 250 299 350 400 450 ];
% Erec @ 125 C (per data sheet curves)
Erec(2,:)= [ 0 85.9 113 165 211 248 280 306 325 336 340 ];
% Eon @ 25 C (calculated using data sheet spec at 25 C)
Erec(1,:)=Erec_250A(1)/Erec_250A(2) * Erec(2,:);
%
% Diode - Typical on-state characteristics
Tj_OnState= [ 25 125 ];
If_OnState = [ 0 0.01 14.0 43 66.5 101 162 250 401 500 ];
Vf_OnState = [ 0 0.75 1.13 1.40 1.53 1.65 1.81 2.00 2.25 2.39
0 0.50 0.90 1.20 1.37 1.55 1.81 2.11 2.50 2.71 ];
%-------------------------------------------------------------------------
%
% Thermal Impedance:
%
Rth_jc=0.102; % Junction-to-Case thermal resistance(K/W)
% Based on transient thermal impedance vs. time curve
Cth_j=1.3235; % Junction thermal capacitance (Joule/Kelvin)
%
%-------------------------------------------------------------------------
LossSpec_Diode(3)= struct('Type',Type, 'Manufacturer',Manufacturer, 'PartNo',PartNo, ...
'Description',Description, 'Vcc_Erec',Vcc_Erec, ...
'Tj_Erec',Tj_Erec, 'If_Erec',If_Erec, 'Erec',Erec, ...
'Tj_OnState',Tj_OnState, 'If_OnState',If_OnState, 'Vf_OnState',Vf_OnState, ...
'Rth_jc',Rth_jc, 'Cth_j',Cth_j);
%
clear Vcc_Erec Tj_Erec If_Erec Erec Tj_OnState ...
If_OnState Vf_OnState Manufacturer PartNo Description Type ...
Rth_jc Cth_j Tj_250A Erec_250A
%=========================end of specifications===========================
%% Add your own specifications here
% Type='Diode';
% Manufacturer= 'My Manufacturer';
% PartNo= 'XXX';
% Description= 'My Module, YYY V, ZZZ A;
% ....
%% Save diode thermal data structure "LossSpec_Diode" in "LossSpec_Diode_Library.mat" file
save LossSpec_Diode_Library LossSpec_Diode
%
