how can I move a Point in a plot (GUI) from one side to the other in a fixed time?

3 views (last 30 days)
I have a point in a plot and I want to move it "smoothly" to the other side of the plot within a fixed amount of time. In the example this time is 3s, and I refresh the plot "every 20ms" (20ms is what I want, but it's always more, between: 30 and 50ms). My code is:
interval=3000/20; %3000/20=150
a=0;
for i=1:1:interval
iTime=clock;
set(pointHandle,'Xdata',point(1).coordinatesNow(1)+(500/150),'Ydata',point(1).coordinatesNow(2)); %Only refresh Xaxis
point(1).coordinatesNow(1)=point(1).coordinatesNow(1)+(500/150);
pause(0.02); %pause of 20ms
a=a+etime(clock,iTime); %total elapsed time
end
disp(a); %show total time
So I'd like "a" to be 3s, but most of the times is between 7 and 10s, How could I get more accuracy?

Accepted Answer

Robert Cumming
Robert Cumming on 19 Oct 2014
Edited: Robert Cumming on 20 Oct 2014
edit: changed timing to an overall target for loop instead of interval time.
See the code below:
figure;
ax = axes;
x = [0:100];
h = plot ( ax, x, x*0 );
ax.YLim = [0 100];
targetTime = 3;
nSteps = 100;
intervalTime = targetTime./nSteps;
loop = tic;
for ii=1:nSteps
h.YData(:) = ii;
drawnow();
timeTaken = toc(loop);
% comment out this line to see the effet of the pause
pause(max(0,(intervalTime.*ii)-timeTaken));
end
toc(loop)
When I run this in matlab I get the following:
Elapsed time is 1.174296 seconds. (pause commented out)
Elapsed time is 3.006906 seconds.
  2 Comments
Óscar
Óscar on 20 Oct 2014
Thanks, but I don't know why, but if I run it in my pc it the overall time is between 20.3 and 20.8, the first one it's OK but not the second one. Now if your code change eachLoopTarget=0.03, then the overall time should be 3seconds but it's at least 3.5... (and 0.5s more is too much for my app) Thank you anyway.
Robert Cumming
Robert Cumming on 20 Oct 2014
Edited: Robert Cumming on 20 Oct 2014
There will be a small overhead of calculating the input to the pause function and for the loop itself.
You could test what that value is (around .5 from your figures above) and modify your eachLoopTarget variable accordingly.
edit I have changed my example code to target a total time rather than a explicit interval time.

Sign in to comment.

More Answers (2)

Image Analyst
Image Analyst on 18 Oct 2014
What happens to the time if you reduce the .02 to something less?
  3 Comments
Image Analyst
Image Analyst on 18 Oct 2014
It's almost impossible to get super precise timing with a multi-tasking operating system. I don't know why your uses need it to be exactly 3.00000 seconds, but if they do, maybe elevating the priority of the MATLAB process to High, or even "Real time" might work, though using Real time is very risky since it won't pay attention to anything else in your computer (like clicking on other applications) until your app is done.
Alternatively, look in to the Real Time toolboxes - maybe there's something there that can help.
Óscar
Óscar on 18 Oct 2014
Thank you, I don't really need it to be 3.000 seconds, it can be 2.9 or 3.1, but the things is that 3s it's only an example the user we'll have to select it, and he'll be able to choose whichever time he wants... now it's only for 1 point, but there are going to be up to ten points... so I'm just wondering which is the best choice to get a time as accurate as possible.
Thanks

Sign in to comment.


Robert Cumming
Robert Cumming on 18 Oct 2014
You need to work out how long it takes to update the plot, then adjust your pause command to suit at runtime so that the code runs at the speed you want it to.
  7 Comments
Image Analyst
Image Analyst on 19 Oct 2014
Maybe try a small for loop where it just spins it's wheel for a short time
tic
for k = 1:3000
end
toc
Elapsed time is 0.000008 seconds.
Adjust the ending value to trim it to shorter or longer times.
Robert Cumming
Robert Cumming on 19 Oct 2014
I dont know wwhy you think pause will take longer, this time it would have no plot refresh so it should pause for the requested time.
See my other answer for an example code (I didn't edit this one as I answered it with an old account that I no longer use....)

Sign in to comment.

Categories

Find more on Graphics Performance in Help Center and File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!