Hardware co-simulation kintex7 and fmc150

My aim is to do hardware co-simulation in Matlab using the reference design for hardware co-simulation (using kintex 7 and fmc 150 card) provided on the site.

Steps followed 1)Downloaded the using-xilinx-system-generator-for-dsp-with-simulink-and-hdl-coder.zip file containing the plugins and the reference design.

2)I installed the plugin as suggested in the Using Xilinx System Generator for DSP with Simulink and HDL Coder Tutorial v1_0 pdf document.

3)Running only the simulation works properly.getting the constellation plot on the scope.

4)For doing hardware co-simulation I changed the compilation mode to data acquisition mode.

5) And then running the simulation, the following window comes and shows that the fpga is programmed through the JTAG

6)But the constellation scope on the Simulink model shows nothing.

I also checked the DAC C & D port output on oscilloscope but nothing was coming on it. For checking whether the card is working properly I dumped the reference bit file on it and checked the output of the DAC C & D port on oscilloscope .it was correctly producing the sine wave output. But the hardware co-simulation design file is dumping on FPGA but no output is coming on scope in Simulink and also no output is coming on DAC Port C & D.

can somebody help me with this? Thanks a lot Gitanjali kalbhor